CTM PCX3000 – 3000 GPH – 115/230V 50/60Hz – 3.31″ Impeller – Marine Centrifugal Pump

Description CTM PCX3000 – 3000 GPH – 115/230V 50/60Hz – 3.31″ Impeller – Marine Centrifugal Pump Liquids and Temperatures The corrosion-resistant alloys used are compatible with common liquids including water, water solutions, oils, and many commercial chemicals. Severe solvents are not compatible with the Nitrile and should not be pumped. Suction Lift These centrifugal pumps are not self-priming. They must be installed below the liquid level so that the liquid flows to the pump by gravity (flooded suction). However, if a foot valve is used at the beginning of the suction line, and all air is bled from the pump by manual priming, the pump will lift on the suction side up to 15 feet. Such a system relies entirely on the non-leaking foot valve for starting capability. Features All Bronze marine centrifugal pump High Capacity Freshwater or Seawater applications. Presicion machined to close tolerances for consistent performance. Heavy-Duty cast construction with a close-coupled back pull-out design. Enclosed & Semi-open impeller with continuous duty motor. Shaft seal rated at 75psi – 5 BAR, with Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components. 2 pole totally enclosed fan cooled IP-44 motor, that meets marine, European, and Coast Guard ignition protected requirements.